Hydraulic hedge cutter / boom mower for tractor - DELEKS® FALCO-160 - double hydraulic pump system - HYDROCONTROL made in Italy Hydraulic system.
Ideal for compact and mid size tractors with a minimum gross weight of 800kg. Perfect for maintaining small bushes, trees and pruning edges with a max diameter of 2-3 cm. Works on both sides (right and left). The FALCO features a reversible frame with a 160cm cutting bar with 21 blades. This is a highly adaptive, easy to operate machine that cuts cleanly and environmentally without flailing your hedge to death.
Cutting measures (see pictures):
A1: 4800 mm
A2: 3200 mm
B1: 3700 mm
B2: 5500 mm
C1: 2800 mm
C2: 1000 mm
Length of the hydraulic pipes to the distributor: 2500 mm.
Length of the hydraulic pipes to the hydraulic pump (PTO): 900 mm.
BENEFITS & FEATURES
Very safe to operate as it does not have high speed flying obstacles from the cutter bar head, unlike a flail therefore it can be used safely without a cab on even the smallest tractors.
Has its own Hydraulic system (HYDROCONTROL - Made in Italy): it runs completely off the PTO, no need to connect the tractors hydraulics.
The double hydraulic pump system allows to move together the arm and the cutter bar.
Efficient remote control with 4 levers and flexible hoses.
As a low weight machine, this cutter fits tractors universally, small to large, eg from small Kubota, Iseki, Mitsubishi, right up to 60hp mid size tractors.
20 L oil tank (already supplied level).
Documentation supplied with this article:
Invoice or Receipt
EC Certification and Risk Analysis (Valid throughout Europe) edited by ECO Spa (Faenza - Italy).
Note: Due to transport reasons, the main arm is temporarily fixed at a lower point, to limit the overall height. The assembly in working position will be carried out by the customer before the first use.
|Characteristic||Units metric||Units US|
|Working width||1600.0 mm||5.25 ft|
|Overall width||1400.0 mm (closed)||4.60 ft (closed)|
|Weight||275.0 kg||600.0 lb|
|Overall height||2300.0 mm||7.55 ft|
|Tractor Power Range||20-60 Hp||20-60 Hp|
|3 point linkage||Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm)||Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm)|
|Spacing between the 2 lower points||650.0 - 940.0 mm||25.60 - 37.00 in|
|Maximum cutting diameter||20.0-30.0 mm||0.80 - 1.20 in|
|Overall length||400.0 mm||1.31 ft|
|Transmission: Drive method||Hydraulic||Hydraulic|
|Transmission: PTO||540 r/min||540 r/min|
|Transmission: Rotation of gearbox||Right side||Right side|
|Number of Blades||21||21|
|Min./Max. Relief Pressure||120 - 150 bar||120 - 150 bar|
|Min./Max. Flow||18 - 22 l/min||18 - 22 l/min|
|Hydraulic Hoses||WP 400 Bar||WP 400 Bar|
|Packing sizes||1500.0*800.0*2000.0 mm||4.92*2.62*6.56 ft|