How to choose and use a forestry crane for your tractor
Before buying, check the power, hitch and hydraulics of your tractor.
1. What it is for
The forestry crane loads and unloads logs, firewood, posts and battens effortlessly, for example from the woodland to the trailer or from the trailer to the pile. It is designed for small farming and forestry businesses and for anyone preparing their own firewood.
2. Capacity and reach
The telescopic boom is 3 m long with a reach of 2.7 m; the crane lifts up to 250 kg and loads up to 3.3 m high. The boom slews through 270° and the grapple, with its rotator, turns to position the log.
3. Tractor and hydraulics
You need a tractor of at least 30 hp with a category 1 three-point hitch and hydraulics delivering 30–40 l/min at 90–150 bar. The control valve with flow-regulating and locking valves gives precise, controlled movements.
4. Stability and safety
The stabilisers spread from 1.2 to 2.4 m: always open them on firm ground before lifting. Never stand within the crane's working range, do not exceed the capacity and work with the tractor stationary and the brake applied.
| Feature | Value |
|---|---|
| Maximum load | 250 kg |
| Maximum loading height | 3.3 m |
| Telescopic boom / reach | 3 m / 2.7 m |
| Boom slewing | 270° |
| Stabilisers | from 1.2 to 2.4 m |
| Tractor | from 30 hp, category 1 three-point hitch |
| Hydraulics | 30–40 l/min, 90–150 bar |
| Weight | 390 kg |
What tractor does the forestry crane need?
A wheeled or tracked farm tractor of at least 30 hp, with a category 1 three-point hitch and hydraulics delivering 30–40 l/min. Also check that the lift can carry the 390 kg weight of the crane.
Is the grapple included?
Yes, the crane comes complete with log grapple and hydraulic rotator, ready to work.
What logs can I lift with 250 kg?
It depends on species and moisture: a fresh log 25 cm in diameter and 4 m long weighs about 150–200 kg. Cut heavier logs shorter before loading them.
Is it easy to remove from the tractor?
Yes, it fits and comes off the three-point hitch quickly, so the tractor stays free for other jobs.
Frequently asked questions
What tractor do I need for the forestry crane?
A tractor of at least 30 hp with a category 1 three-point linkage and hydraulics delivering 30-40 l/min at 90-150 bar. The control valve with flow-regulating and lock valves is included and gives precise movements.
How much does it lift and how high?
Up to 250 kg (550 lb) at 2.7 m (8'10") reach and up to 3.3 m (10'10") loading height: enough for farm trailers and tall stacks. The telescopic boom is 3 m (9'10") long and slews through 270°.
Are the grapple and rotator included?
Yes, the crane comes complete with log grapple and hydraulic rotator, which turns the grapple on itself to set the log down where needed.
Is it stable when loading?
Yes, with the stabilisers that spread from 1.2 to 2.4 m (3'11" to 7'10") and rest on the ground before you work; keep the tractor level with the brake on.
How long does it take to fit and remove?
A few minutes: it hooks onto the three-point linkage and the hoses connect to the tractor's hydraulic couplings, so the tractor stays free for other jobs.
Can I use it to load a trailer?
Yes: that is the job it is built for, from the wood to the trailer and from the trailer to the stack or wood store, without lifting logs by hand.
How much does the forestry crane cost and what warranty does it have?
The price is on the product page, with the pallet delivery cost shown in the basket. Two-year warranty on defects in materials and workmanship; wear parts excluded.
Products marked with the Italian flag and the Made in Italy indication are designed and manufactured predominantly in Italy; products without these indications are essentially manufactured abroad.
Français
Deutsch
Română
Русский
Bokmål