How to choose the right forestry equipment
The choice depends on the machine you have, the type of work and the weight of the logs to handle.
1. Log grapples
They grip and move logs, branches and firewood. They carry 400 to 2,500 kg, open from about 1 to 1.6 m and fit mini excavators from 1.5 to 10 t. With a hydraulic rotator the grapple turns through 360°, so you can position the log without moving the machine.
2. Tree shears
They cut shrubs and small trees up to 10–13 cm in diameter and, thanks to the built-in grapple, hold the cut tree so you can move and stack it safely. They suit clearing of banks, field edges and parks and thinning work, on mini excavators from 1 to 3 t.
3. Sorting grapples and rotators
The sorting grapple handles stones, timber, scrap and mixed materials, on mini excavators from 0.8 to 3.5 t. Hydraulic rotators, rated from 1,000 to 4,500 kg, fit between the arm and the grapple and are chosen according to the weight of the grapple and the load.
4. Timber cranes and log conveyors for tractors
The forestry crane mounts on the three-point hitch of tractors from 30 hp and loads logs up to 250 kg, with grapple and rotator included. The log conveyor, driven by the tractor hydraulics, lifts firewood up to 3.6 m to load trailers and piles.
5. Hydraulics
Grapples and shears run on the machine's auxiliary hydraulics: check the required pressure and oil flow on the product page. Versions with a rotator need an extra hydraulic function for rotation.
| Equipment | Machine | Key figure | Use |
|---|---|---|---|
| Log grapples | Mini excavators 1.5–10 t, cranes, front loaders | Capacity 400–2,500 kg | Logs and firewood |
| Tree shears | Mini excavators 1–3 t, forestry cranes | Cutting up to 10–13 cm | Shrubs, small trees, thinning |
| Sorting grapples | Mini excavators 0.8–3.5 t | Capacity 150–250 kg | Stones, timber, mixed materials |
| Hydraulic rotators | Between arm and grapple | Capacity 1,000–4,500 kg | 360° grapple rotation |
| Forestry cranes | Tractors from 30 hp, three-point hitch | Load 250 kg, height 3.3 m | Loading logs |
| Log conveyors | Tractors with 2 hydraulic outlets | 5 m ramp, height 3.6 m | Loading trailers and piles |
What is the difference between a log grapple and a tree shear?
A log grapple grips and moves logs and firewood that are already cut. A tree shear cuts the tree at the base and holds it with its built-in grapple, so you can fell, move and stack with one attachment.
Which mini excavator can take a log grapple?
Log grapples fit mini excavators from 1.5 to 10 t depending on capacity, and shears machines from 1 to 3 t. Check the machine weight, pressure, oil flow and type of arm connection on the product page.
Do I need a rotator?
No, but with a rotator the grapple turns through 360° and you can position logs without moving the machine: handy for loading trailers and building neat piles. It needs an extra hydraulic function.
Can they be used with a tractor?
Grapples and shears also fit forestry cranes and front loaders. For a tractor without a loader there is the three-point forestry crane, complete with grapple and rotator.
What diameter can a tree shear cut?
Depending on the model, trees and branches up to 10–13 cm in diameter. It is designed for shrubs, coppice shoots and small trees; larger trunks need a chainsaw.
Frequently asked questions
Which log grapple do I need for a 1.5 or 1.8-tonne mini digger?
The 400 and 600 kg grapples, weighing 52 to 73 kg (115 to 160 lb), for machines from 1.5 to 3 tonnes, on 18-22 l/min at 80-120 bar. For machines from 1.8 to 3.5 tonnes there is the 1,000 kg grapple, from 4 to 8 tonnes the 2,000 kg one, from 5 to 10 tonnes the 2,500 kg one. With the make and model we confirm capacity and hitch.
Can I fit a log grapple to a tractor?
Yes, to the front loader or the forestry crane of the tractor, with a double-acting hydraulic line to open and close the grapple and, if fitted, the rotator. On a crane the grapple hangs from the rotator; on a front loader it is fixed to the loader's hitch.
What is the difference between a log grapple and a selector grab?
The log grapple has long, narrow tines to grip logs, branches and bundles from 400 to 2,500 kg; the selector grab has two wide, closed shells, carries 150 to 250 kg and picks up stones, rubble and loose material as well as timber, on mini diggers from 0.8 to 3.5 tonnes.
Do I need a rotator?
Not always: the grapples come with and without. With the rotator the grapple turns through 360° and you set the log down where you want without moving the machine, useful on a crane and for stacking. Rotators are chosen by capacity, from 1,000 to 4,500 kg, adding the weight of the grapple to the load.
What does the tree shear cut?
Shrubs and small trees up to 10-13 cm (4-5") in diameter, with a hardened steel blade; the built-in grapple holds the cut tree so you move and stack it without it falling. They fit mini diggers and mini excavators from 1 to 3 tonnes and forestry loaders.
What tractor do I need for the forestry crane?
A tractor of at least 30 hp with a category 1 three-point linkage and hydraulics delivering 30-40 l/min at 90-150 bar. The crane lifts up to 250 kg (550 lb) at 2.7 m (8'10") reach and loads up to 3.3 m (10'10") high, with telescopic boom, 270° slewing, grapple and rotator included.
What is the firewood conveyor for?
For loading firewood and logs onto trailers, stacks and wood stores without lifting them by hand: 5 m (16') ramp, discharge up to 3.6 m (11'10") high, pieces up to 30 cm (12") in diameter, hydraulic motor fed by the tractor's two couplings.
How many litres per minute do the grapples need?
18 to 22 l/min at 80-120 bar for the grapples up to 1,000 kg, 120-150 bar for the 2,000 kg ones, 25-50 l/min at 150-220 bar for the 2,500 kg grapple. The figure for the auxiliary line is in the machine's manual.
Are the grapples and shears made of Hardox?
The shears are entirely Hardox 450 with a through-hardened blade; the grapples are also available in a Hardox version, more wear-resistant for the same weight.
How much does forestry equipment cost and what warranty does it have?
Prices are on each product page, with the pallet delivery cost shown in the basket. Two-year warranty on defects in materials and workmanship; blades, tines and wear parts excluded.
Products marked with the Italian flag and the Made in Italy indication are designed and manufactured predominantly in Italy; products without these indications are essentially manufactured abroad.
Français
Deutsch
Română
Русский
Bokmål