Filter by sub-categories
The machines
DELEKS® mini diggers cover everything from jobs around the house to site work, and for Europe the heart of the range is the machines up to 1.3 tonnes and the electric models: 650 to 900 kg with petrol or diesel engine for the smallholder; 1 to 1.3 tonnes, Kubota or Koop diesel or electric, for farms and light building work; 1.8 to 3.8 tonnes with zero tail swing and cab versions for contractors, on request. All with dozer blade, boom swing and standard bucket included; the buying guide is on the mini diggers page.
Mini digger attachments
- Buckets. Mini digger buckets for digging from 200 to 1,500 mm (8 to 59 in) wide, grading buckets for levelling, riddle buckets for stones and roots, hydraulic tilt buckets for banks and ditches.
- Flail heads. Flail mower for mini digger, with hammers or blades, for brambles, hedges and undergrowth, on the arm where the tractor cannot reach.
- Grabs. Log and timber grab for mini digger, selector grab for site and demolition work, forestry grab.
- Breakers. Hydraulic breaker for mini digger for concrete, rock and tarmac, with spare chisels; post knocker for vineyard and fence posts.
- Augers. Auger for mini digger with hydraulic drive and 100, 150, 200, 250 and 300 mm (4, 6, 8, 10 and 12 in) bits, for posts, planting and footings.
- Rakes and rippers. Land rake for mini digger to gather stones, roots and branches; ripper tooth to break hard ground before digging.
- Quick hitches, thumbs and spares. Mechanical quick hitch to swap attachments in a minute, hydraulic thumb to grip with the bucket, pin kits, spare teeth and twin teeth.
- Other. Tree shear for branches and small trunks, cutter bar, cone log splitter, pallet forks.
Compatibility: the three measurements
An attachment fits a mini digger when three measurements match: the diameter of the two pins, the pin centres and the inside width of the fitting, that is the distance between the two ears where the dipper arm sits. If the pin diameter and centres match and the attachment's inside width is equal to or wider than the dipper arm, it fits: at most you add shims. DELEKS® attachments come in six fitting classes:
- 25 mm pins, 85 mm centres, 92 mm inside width (0.98, 3.35 and 3.62 in): DELEKS® machines from 900 kg to 1.3 tonnes;
- 25 mm pins, 85 mm centres, 102 mm inside width (4.02 in): DELEKS® zero tail swing 1 and 1.2 tonne; by the makers' published figures it also fits Kubota K008-3 and Hitachi EX8;
- 30 mm pins, 125 mm centres, 105 mm inside width (1.18, 4.92 and 4.13 in): the 1.8 tonne class, which is also the fitting of many 1.5 to 2 tonne mini diggers of other makes: CAT 301.6, Doosan S018, Daewoo S015, Hyundai R15-7 and R16-7, Link-Belt ME15, Nagano NS15;
- 30 mm pins, 90 mm centres, 96 mm inside width: DELEKS® 1.8 tonne zero tail swing;
- 35 mm pins, 153 mm centres, 124 mm inside width: 2.8 tonne class;
- 40 mm pins, 190 mm centres, 135 mm inside width (1.57, 7.48 and 5.31 in): 3.8 tonne class, the same as Volvo EC35C and ECR38, Takeuchi TB035 and TB36, Kubota KO30, Kobelco SK032 and SK035, IHI IS35.
Compatibility with other makes is worked out from the makers' published figures: always check on your own machine before ordering. For other sizes there are pin kits: with pins and bushes of the right size most attachments can be adapted.
Frequently asked questions
How do I know if an attachment fits my mini digger?
Measure the diameter of the bucket pins, the distance between their centres and the inside width of the bucket fitting, then compare them with the three measurements on the attachment page. If pin diameter and centres match and the attachment's inside width is equal to or wider than the dipper arm, it fits: at most you add shims.
Do DELEKS® attachments fit a mini digger of another make?
Yes, if the three measurements match; with a pin kit, machines with different pins can be adapted too. This page and the product pages list other makes' models with the same measurements, always to be checked on your own machine.
How heavy an attachment can I fit?
It depends on what the arm can lift: under 1 tonne stay with light attachments, buckets up to 600 mm (24 in), rake, ripper; breaker, flail head and hydraulic grab need a 1 tonne machine or more and the auxiliary hydraulic circuit, shown on the product page.
Mechanical or hydraulic quick hitch?
The mechanical one swaps attachments in a minute, getting off the machine only for the pins; it costs little and has no hoses. The hydraulic one does everything from the seat and is the choice of anyone changing attachments many times a day.
Which bucket to start with?
A narrow one of 200 to 300 mm (8 to 12 in) for pipe trenches and footings, a wide one of 600 to 800 mm (24 to 31 in) for earthmoving and loading, a grading bucket for levelling: with three buckets you can do almost everything.
How are they delivered?
Delivery costs and options are shown on each product page for your country, on a pallet; attachments up to 1,000 kg are unloaded with a tail lift.
What warranty do they have?
Two years; spare pins, teeth and chisels are in stock.
Français
Deutsch
Română
Русский
Bokmål