This page needs JavaScript activated to work. Mini digger and mini excavator augers: prices | DELEKS
Free shipping in over 24 European countries

Opening hours 09:00–16:30. Free delivery nationwide within the EU with standard shipping. Estimated delivery within 20-25 days of confirmed order – telephone notification upon dispatch.

Hydraulic augers for mini diggers and mini excavators from 0.5 to 6 tonnes: auger drives with and without gearbox, 10 to 30 cm (4" to 12") augers and stump grinder

Hydraulic augers for mini diggers and mini excavators from 0.5 to 6 tonnes, skid steers, backhoes and tractors with front loader, for drilling holes for fence posts, vineyards and orchards, tree planting, signposts and footings with the machine you already have: orbital-motor auger drives, light and fast, for machines from 0.5 to 2 tonnes, and gearbox drives, from 1,600 to almost 5,000 Nm of torque, for excavators from 2.5 to 6 tonnes and hard ground; interchangeable augers of 10, 15, 20 and 30 cm (4", 6", 8" and 12") diameter with pilot tip, a 30 cm vertical stump grinder for the larger drives, hoses included. Every drive connects with two hoses to the auxiliary line and mounts with the pins of its DELEKS® hitch size, with the saddle for the S30 quick hitch, with a saddle made to measure for your machine or with saddles for standard quick couplers such as MS01 and AR15: so it fits mini diggers of other makes too, Kubota, Bobcat, Takeuchi, JCB, Yanmar. Delivered on a pallet by courier, with the cost shown in the basket.

Available
-71,00€ 475,00€VAT incl.
404,00€VAT incl.
or 3 installments of 134,67 €

Free shipping

Weight: 53.0 lb
Compact Excavators Range: 0.5 - 1.2 ton
Min./Max. Flow: 15-20 l / min
Not available  Notify me
Weight: 11.0 lb
Available
165,00€VAT incl.
or 3 installments of 55,00 €

Free shipping

Weight: 15.4 lb
Available
Weight: 20.0 lb
Available
-55,00€ 546,00€VAT incl.
491,00€VAT incl.
or 3 installments of 163,67 €

Free shipping

Weight: 66,1386 lb
Compact Excavators Range: 2204.6 - 4409.2 lb
Min./Max. Flow: 15-60 l / min
Available
628,00€VAT incl.
or 3 installments of 209,33 €

Free shipping

Weight: 66,1386 lb
Compact Excavators Range: 2204.6 - 4409.2 lb
Min./Max. Flow: 20-60 l / min
Available
206,00€VAT incl.
or 3 installments of 68,67 €

Free shipping

Weight: 20.0 lb
Available
-36,00€ 242,00€VAT incl.
206,00€VAT incl.
or 3 installments of 68,67 €

Free shipping

Weight: 17.6 lb
Not available  Notify me
263,00€VAT incl.
or 3 installments of 87,67 €

Free shipping

Weight: 35.0 lb
Available
299,00€VAT incl.
or 3 installments of 99,67 €

Free shipping

Weight: 42.0 lb
Not available  Notify me
1.020,00€VAT incl.
or 3 installments of 340,00 €

Free shipping

Weight: 132.0 lb
Compact Excavators Range: 1.5 - 2.5 t
Min./Max. Flow: 20-60 l / min
Available
-24,00€ 237,00€VAT incl.
213,00€VAT incl.
or 3 installments of 71,00 €

Free shipping

Weight: 22.0 lb
Available
299,00€VAT incl.
or 3 installments of 99,67 €

Free shipping

Weight: 36.5 lb
Available
340,00€VAT incl.
or 3 installments of 113,33 €

Free shipping

Weight: 44.0 lb
Available
-389,00€ 1.947,00€VAT incl.
1.558,00€VAT incl.
or 3 installments of 519,33 €

Free shipping

Weight: 192.0 lb
Compact Excavators Range: 3.0-6.0 ton
Min./Max. Flow: 40-95 l / min
Available
Weight: 194.0 lb
Compact Excavators Range: 3.0-6.0 ton
Min./Max. Flow: 40-95 l / min
Available
-111,00€ 556,00€VAT incl.
445,00€VAT incl.
or 3 installments of 148,33 €

Free shipping

Weight: 92.6 lb
Available
-64,00€ 639,00€VAT incl.
575,00€VAT incl.
or 3 installments of 191,67 €

Free shipping

Weight: 147.0 lb
Available
937,00€VAT incl.
or 3 installments of 312,33 €

Free shipping

Weight: 48.5 lb
Available
-74,00€ 496,00€VAT incl.
422,00€VAT incl.
or 3 installments of 140,67 €

Free shipping

Weight: 105.0 lb
Compact Excavators Range: 0.5 - 1.2 ton
Min./Max. Flow: 15-20 l / min
Available
-30,00€ 299,00€VAT incl.
269,00€VAT incl.
or 3 installments of 89,67 €

Free shipping

Weight: 42.0 lb
Available
263,00€VAT incl.
or 3 installments of 87,67 €

Free shipping

Weight: 33.0 lb
Available
206,00€VAT incl.
or 3 installments of 68,67 €

Free shipping

Weight: 26.0 lb
Not available  Notify me
496,00€VAT incl.
or 3 installments of 165,33 €

Free shipping

Weight: 57.0 lb
Compact Excavators Range: 0.5 - 1.2 ton
Min./Max. Flow: 15-20 l / min
Not available  Notify me
445,00€VAT incl.
or 3 installments of 148,33 €

Free shipping

Weight: 80.0 lb
Compact Excavators Range: 0.5 - 1.2 ton
Min./Max. Flow: 15-20 l / min
Not available  Notify me
520,00€VAT incl.
or 3 installments of 173,33 €

Free shipping

Weight: 105.0 lb
Compact Excavators Range: 0.5 - 1.2 ton
Min./Max. Flow: 15-20 l / min

How to choose an auger for your mini digger

  • Direct drive or gearbox. The orbital-motor drive turns fast, up to 300 rpm, with around 460 Nm of torque: fine for posts, fences and planting in normal ground with machines from 0.5 to 2 tonnes, it weighs 24-30 kg and fits in minutes. The gearbox drive turns slowly, 30-60 rpm, but with 1,600 to almost 5,000 Nm of torque: that is the one for compacted, clay or stony ground, for the 30 cm augers and for excavators from 2.5 to 6 tonnes. Torque matters more than speed: an auger that spins fast but stalls in hard ground does not make the hole.
  • Machine weight and hydraulics. The small drives work with 15-20 l/min at 160 bar, the medium ones with 20-60 l/min at 180 bar, the gearbox drives with 40-95 l/min at up to 210 bar: the flow and pressure of the machine's auxiliary line are in its manual and should be compared with the figures on the product page. A drive that asks for more oil than the machine gives turns slowly and overheats; one undersized for the machine breaks.
  • Auger diameter and depth. The 10 and 15 cm augers are for fence posts, saplings and stakes; the 20 cm one for vineyard, orchard and signpost posts; the 30 cm one for trees, large posts and footings. They swap in a minute on the same drive. Depth depends on the length of the auger and on the ground: you go down as far as the flight can bring the spoil up. For stumps there is the vertical stump grinder, which fits in place of the auger and grinds the stump below ground level.
  • Fitting to the dipper. The drive fits in place of the bucket with the pins of its hitch size or with the saddle for the S30 quick hitch; for other machines, as an option, there is the saddle made to measure for your mini digger or the saddle for standard quick couplers, MS01, AR15 and the like; for skid steers, backhoes and tractors with loader there is the bracket. The three dimensions to compare are always the same: pin diameter, pin centres and inside width of the hitch, listed on every product page. The drive hangs from the dipper and lines itself up vertically: the hole comes out straight without forcing.
  • Hard ground, stones and roots. In compacted ground start with a small auger and widen with the large one; in stony ground work with the gearbox drive at low speed, lifting the auger every 20-30 cm to clear the spoil. Roots are cut by the pilot tip; large stones are removed with the bucket. The right speed is the one that brings the soil up the flight without smearing it.
  • Delivery, warranty and spares. Drives and augers travel on a pallet by courier; the hoses are included, the quick couplings are not, because every mini digger has its own line and they are chosen accordingly; pilot tips and stump grinder blades are in stock. Two-year warranty on defects in materials and workmanship; tips, blades and wear parts excluded.

Frequently asked questions

Which auger drive do I need for my mini digger?
Choose it on the weight of the machine and its auxiliary line: orbital-motor drives for machines from 0.5 to 2 tonnes, gearbox drives from 2.5 to 6 tonnes. With the make and model we point you to the right one.

What is the difference between the direct drive and the gearbox drive?
The direct drive turns fast with little torque, fine for posts and fences in normal ground; the gearbox drive turns slowly with up to ten times the torque, for hard ground, 30 cm augers and larger excavators.

Which auger diameter for fence posts?
10 to 15 cm (4" to 6") for posts and stakes, 20 cm (8") for vineyard posts and signs, 30 cm (12") for trees and footings. Augers swap on the same drive.

How deep does it drill?
It depends on the length of the auger and on the ground: the auger goes down as long as the flight brings the spoil up, deeper in soft ground than in hard.

Does the auger fit a mini digger of another make?
Yes: with the pins of the same hitch size, with a saddle made to measure for the machine or with the saddle for standard quick couplers such as MS01 and AR15; for skid steers and backhoes with the bracket. The dimensions to compare are on every product page.

How many hydraulic lines do I need?
One double-acting auxiliary line with two hoses. The hoses are included; the quick couplings are chosen to suit your machine's line.

Does it work in stony ground or through roots?
Yes, with the gearbox drive at low speed, lifting the auger often to clear the spoil. Roots are cut by the tip; large stones have to be taken out with the bucket.

What is the vertical stump grinder?
A 30 cm cutter that fits in place of the auger on the gearbox drives and grinds stumps below ground level without pulling them out.

How much does a mini digger auger cost?
Prices for drives and augers are on each product page, with the pallet delivery cost shown in the basket.

What warranty do the augers have?
Two years on defects in materials and workmanship; tips, blades and wear parts excluded.

What our customers say about us