Filter by sub-categories
How to choose a cone log splitter for your mini digger
- How the cone splitter works. The screw cone rests on the log and, turning, drives itself into the wood: the cone spreads the fibres and the log opens along the grain, without wedges and without blows. You work with the log on the ground or on the pile, where it lies, and with a few more turns the screw holds the piece and moves it: the same machine splits, loads and stacks. It is the fastest way to break down large logs that will not fit a wedge splitter.
- Direct drive or gearbox. The two direct-drive heads have a 310 and 390 cc motor in the body and run on 30-70 and 50-95 l/min, for machines from 2 to 5 tonnes; the head with a planetary gearbox has a 195 cc motor with reducer, runs on 40-75 l/min and gives the highest torque for the same oil, for excavators from 3 to 6 tonnes and for the hardest, knottiest wood. The flow of the machine's auxiliary line decides: with too little oil the cone turns slowly and stalls in hard wood.
- Machine weight and hitch. The splitter fits in place of the bucket with the pins of its DELEKS® hitch size or with the plate for the quick coupler; the three dimensions to compare, pin diameter, pin centres and inside width, are on every product page, and with the same dimensions it fits Kubota, Takeuchi, Bobcat, JCB, Yanmar and other makes. The weight of the head, 106 to 128 kg, is compared with the machine's lifting capacity at full reach, because the weight of the lifted log adds to the weight of the head.
- Cone and tip. The cone is 20 cm in diameter and 37 cm long, in special steel, with a replaceable tip that is swapped on its own when worn without changing the cone. Spare cones are in stock, one for the direct-drive heads and one for the gearbox head. Keep the tip sharp: a cone with a rounded tip does not bite and slides on the wood.
- Safety and correct use. The cone turns with a torque no hand can stop: nobody within reach of the arm while working, the log resting stable and the cone perpendicular to the fibres, without forcing sideways with the arm. Short logs are worked from the cut end, long ones from the side, along the grain; knots are avoided by driving in next to them. The head is not to be used as a lever or to drag logs with the arm.
- Delivery, warranty and spares. The heads travel on a pallet by courier; cones, tips and hoses are in stock. Two-year warranty on defects in materials and workmanship; tips, cones and wear parts excluded.
Frequently asked questions
Which cone splitter for my mini digger?
The direct-drive heads for machines from 2 to 5 tonnes, the gearbox head from 3 to 6 tonnes. With the make and model we confirm the flow of the auxiliary line and the hitch.
How many litres per minute do I need?
From 30-70 to 50-95 l/min depending on the head, with two hoses to the auxiliary line. The flow of the line is in the machine's manual and is the first figure to check.
What is the difference between the direct-drive head and the gearbox head?
The direct drive is simpler and faster; the planetary gearbox gives more torque with the same oil flow, for hard, knotty wood and for larger excavators.
What logs does it split?
Large, even knotty logs, lying on the ground or on the pile: the cone drives in and opens the wood along the grain. For small, regular pieces a wedge splitter stays handier.
Can I lift and move logs with the cone?
Yes: with a few more turns the screw holds the log, which is lifted, moved and set down with the arm of the machine.
Does the splitter fit a mini digger of another make?
Yes: with the pins of the same hitch size or with the plate for the machine's quick coupler. The dimensions to compare are on every product page.
Can the tip be replaced?
Yes, the tip is replaceable and is swapped without changing the cone; spare cones and tips are in stock.
Does it suit other machines too?
Yes, excavators and other machines with a hydraulic line within the head's flow range and with the right hitch: with the make and model we confirm.
How much does a cone splitter for a mini digger cost?
Prices are on each product page, with the pallet delivery cost shown in the basket.
What warranty do the cone splitters have?
Two years on defects in materials and workmanship; tips, cones and wear parts excluded.
Français
Deutsch
Română
Русский
Bokmål