This page needs JavaScript activated to work. Mini digger and mini excavator flail mowers | DELEKS
Free shipping in over 24 European countries

Opening hours 09:00–16:30. Free delivery nationwide within the EU with standard shipping. Estimated delivery within 20-25 days of confirmed order – telephone notification upon dispatch.

Flail heads and forestry mulchers for mini diggers and mini excavators, 60 to 120 cm (24" to 47"): blade brush cutters and hammer forestry mulchers for 1 to 8 tonne machines

Hydraulic flail heads for mini diggers and mini excavators from 1 to 8 tonnes, to cut grass, brambles, reeds, bushes and branches where a tractor cannot go: banks, embankments, ditches, roadside verges, hedges and undergrowth, working off the arm of the machine you already have. Blade brush cutters of 60, 80, 100 and 110 cm (24" to 43"), light at 66 to 120 kg, that run on 20-30 l/min and cut up to 2-3 cm (1") in diameter; hammer forestry mulchers of 80, 100 and 120 cm (31" to 47"), from 150 to 320 kg, on 65-100 l/min, for branches up to 4-5 cm (2"). Electronically balanced rotor, rear roller for the cutting height, two hoses to the auxiliary line; mounting with the pins of the DELEKS® hitch size or with plates for the most common quick couplers, so they fit Kubota, Takeuchi, Bobcat, JCB, Yanmar too. Delivered on a pallet by courier, with the cost shown in the basket.

Available
Working width: 1.97 ft
Weight: 145.0 lb
Maximum cutting diameter: 0.8 in
Available
Working width: 2.62 ft
Weight: 175.0 lb
Maximum cutting diameter: 0.8 in
Available
-358,00€ 1.792,00€VAT incl.
Working width: 3.28 ft
Weight: 205.0 lb
Maximum cutting diameter: 0.8 in
Available
Working width: 3.28 ft
Weight: 242.0 lb
Maximum cutting diameter: 1.2 in
Available
Working width: 3.60 ft
Weight: 265.0 lb
Maximum cutting diameter: 1.2 in
Not available  Notify me
Working width: 1.95 ft
Weight: 168.0 lb
Maximum cutting diameter: 0.8 in
Available
Working width: 2.62 ft
Weight: 192.0 lb
Maximum cutting diameter: 0.8 in
Available
-184,00€ 1.844,00€VAT incl.
Working width: 3.28 ft
Weight: 220.0 lb
Maximum cutting diameter: 0.8 in
Available
Working width: 2.56 ft
Weight: 330.0 lb
Maximum cutting diameter: 1.58 in
Available
Working width: 3.28 ft
Weight: 392.0 lb
Maximum cutting diameter: 1.58 in
Available
Working width: 3.94 ft
Weight: 430.0 lb
Maximum cutting diameter: 1.58 in
Available
-213,00€ 2.657,00€VAT incl.
Working width: 2.56 ft
Weight: 595.0 lb
Maximum cutting diameter: 2.0 in
Available
Working width: 3.22 ft
Weight: 640.0 lb
Maximum cutting diameter: 2.0 in
Not available  Notify me
Working width: 3.94 ft
Weight: 705.0 lb
Maximum cutting diameter: 2.0 in
Not available  Notify me
150,00€VAT incl.
or 3 installments of 50,00 €

Free shipping

Weight: 17.6 lb
Not available  Notify me
150,00€VAT incl.
or 3 installments of 50,00 €

Free shipping

Weight: 24.0 lb
Not available  Notify me
190,00€VAT incl.
or 3 installments of 63,33 €

Free shipping

Weight: 40.0 lb
Not available  Notify me
269,00€VAT incl.
or 3 installments of 89,67 €

Free shipping

Weight: 40.0 lb
Not available  Notify me
189,00€VAT incl.
or 3 installments of 63,00 €

Free shipping

Weight: 44.0 lb

How to choose a flail head for your mini digger

  • Blades or hammers. The Y-blade flail head is light and fast: it cuts tall grass, brambles, reeds and suckers up to 2-3 cm, leaves a clean cut and needs little oil flow, which is why, as a rule of thumb, it is the choice for mini diggers from 1 to 3.5 tonnes. The hammer forestry mulcher is heavier and runs on more oil: it shreds bushes, branches and growth up to 4-5 cm and takes knocks on stones, and it is the one, again as a rule of thumb, for excavators from 3.5 to 8 tonnes and for undergrowth. For the same width, hammers weigh twice as much as blades: compare the weight with the machine's lifting capacity at full reach.
  • Width and machine weight. The 60 and 80 cm heads are for machines from 1 to 2 tonnes and for narrow passages, ditches and between plants; the 100 and 110 cm ones for machines from 2 to 3.5 tonnes; the 120 cm ones for the larger excavators. A head that is too wide and heavy makes the machine unstable on banks and tires the arm; one too narrow stretches the job. The weight of each head is on its product page.
  • Hydraulics. Blade heads run on 20-30 l/min at 120-220 bar, hammer heads on 65-100 l/min at 70-140 bar: the flow of the mini digger's auxiliary line is the figure that decides, even before the weight. With too little oil the rotor turns slowly and the head bogs down; with too much it overheats. The line's figures are in the machine's manual and should be compared with those on the product page; if they are missing, we find them from the make and model.
  • Fitting to the dipper. The head mounts with the pins of its DELEKS® hitch size or with plates for the most common quick couplers, such as MS01, MS03, AR15, CW05 and S40: with the right plate it fits any make. The three dimensions to compare are the usual ones: pin diameter, pin centres and inside width of the hitch, listed on every product page. The hydraulic connection is two hoses to the double-acting auxiliary line.
  • Banks, embankments and hedges. The head works where a tractor cannot climb: from the roadside you clear banks and ditches, from the field the embankments, without putting the machine on a slope. The rear roller sets the cutting height, from 2 to 8 cm, and keeps the head off the stones; on hedges and bushes you work from the top down in short passes. The electronically balanced rotor runs without vibration, and blades and hammers are replaced one at a time.
  • Delivery, warranty and spares. The heads travel on a pallet by courier; blades, hammers, bolts and hoses are in stock for quick delivery. Two-year warranty on defects in materials and workmanship; blades, hammers and wear parts excluded.

Frequently asked questions

Which flail head do I need for a 1.5-tonne mini digger?
A 60 or 80 cm blade head, which runs on 20-30 l/min: that is the kind of auxiliary line 1 to 2-tonne machines have. With the make and model we confirm flow and hitch.

What is the difference between a brush cutter and a forestry mulcher?
The brush cutter has Y blades: light, fast, for grass, brambles and suckers up to 2-3 cm. The forestry mulcher has hammers: heavier, needs more oil and shreds branches and bushes up to 4-5 cm.

How many litres per minute do I need?
20-30 for blade heads, 65-100 for hammer heads. The flow of the auxiliary line is in the machine's manual; it is the first figure to check.

Does the head fit a mini digger of another make?
Yes: with the pins of the same hitch size or with the plate for the machine's quick coupler, MS01, MS03, AR15, CW05, S40 and the like. The dimensions to compare are on every product page.

Does it cut branches too?
Blade heads up to 2-3 cm in diameter, hammer forestry mulchers up to 4-5 cm. For bigger trees you need the tree shear or a chainsaw.

Can I work on banks and in ditches?
Yes, that is the job they are made for: the machine stays level on the road or in the field and the head works on the slope off the arm, with the rear roller holding the cutting height.

How much does a flail head weigh?
66 to 120 kg for blade heads, 150 to 320 kg for hammer heads, depending on the width. The weight of each model is on its product page and should be compared with the machine's lifting capacity at full reach.

Do I need a valve or a diverter?
No: the head connects with two hoses to the mini digger's double-acting auxiliary line, with no other components.

How much does a mini digger flail mower cost?
Prices are on each product page, with the pallet delivery cost shown in the basket.

What warranty do the flail heads have?
Two years on defects in materials and workmanship; blades, hammers and wear parts excluded.

What our customers say about us