This page needs JavaScript activated to work. Compact tractor hedge cutters: arm, flail head, finger bar
Free shipping in over 24 European countries

Opening hours 09:00–16:30. Free delivery nationwide within the EU with standard shipping. Estimated delivery within 20-25 days of confirmed order – telephone notification upon dispatch.

Hydraulic hedge cutter arms for compact tractors with flail head or finger bar hedge cutter

Hydraulic hedge cutter arms for compact tractors from 20 to 60 hp, weighing 210 to 300 kg (463 to 661 lb), with an independent hydraulic system driven by the PTO, pump included and lever or joystick control from the driver's seat. The arm carries a 60 to 110 cm (24 to 43 in) flail head with Y-blades, for grass, brambles and branches from 1.5 to 3 cm (0.6 to 1.2 in) depending on the head, or a 130 to 180 cm (51 to 71 in) finger bar hedge cutter, for hedges and branches up to 3 cm (1.2 in), verges and banks up to 3.70 m (12 ft 2 in) high and 3.20 m (10 ft 6 in) of side reach. There are arms with a fixed head, arms that work to the right, to the left and out front, and combined arms that take either the flail head or the finger bar. For compact and orchard tractors: the minimum tractor weight ranges from 800 to 1,500 kg (1,764 to 3,307 lb) depending on the arm. 2-year warranty and free delivery within the EU. Several machines in this category are Made in Italy, built by DELEKS, others are certified by TÜV or ECO Certificazioni: origin and certifications are shown on each product page.

Available
-899,00€ 4.996,00€VAT incl.
Working width: 1.97 ft
Weight: 584.0 lb
Tractor Power Range: 20-60 Hp
Available
-408,00€ 5.099,00€VAT incl.
Working width: 2.62 ft
Weight: 606.0 lb
Tractor Power Range: 20-60 Hp
Available
-416,00€ 5.202,00€VAT incl.
Working width: 3.28 ft
Weight: 657.0 lb
Tractor Power Range: 25-60 Hp
Available
-615,00€ 4.728,00€VAT incl.
Working width: 4.25 ft
Weight: 610.0 lb
Tractor Power Range: 20-60 Hp
Available
-628,00€ 4.831,00€VAT incl.
Working width: 5.25 ft
Weight: 622.0 lb
Tractor Power Range: 20-60 Hp

Flail head or finger bar hedge cutter

The flail head with Y-blades works like a small flail mower: long grass, brambles, reeds and branches from 1.5 to 3 cm (0.6 to 1.2 in), depending on the head, on banks, ditch sides and under fences. The finger bar cuts hedges, branches and growth along verges with a clean, fast cut, up to 3 cm (1.2 in); the double-blade bar, for grass and thin branches, cuts up to 2 cm (0.8 in). The combined arms mount either one on the same plate, so the same arm clears ditches in summer and trims hedges in winter.

Reach, controls and hydraulics

The hydraulic system is independent of the tractor: the pump, included, is driven by the PTO and feeds arm and head, so the tractor needs no extra spool valves or large oil flows. The remote control, with levers or a joystick depending on the model, mounts beside the driver's seat and controls the arm movements. Reach is 3.70 m (12 ft 2 in) in height and 3.20 m (10 ft 6 in) to the side on the arms with a symmetrical structure, which work to the right, to the left, in front of and behind the tractor.

The right tractor

From 20 to 60 hp, with a minimum weight of 800 to 1,500 kg (1,764 to 3,307 lb) depending on the arm: extended to the side, the arm shifts the centre of gravity. Three-point linkage and 540 rpm PTO. Suited to Kubota, Iseki, Yanmar, Carraro, Goldoni, Solis and the other compact and orchard tractors.

Frequently asked questions

Hedge cutter arm or verge flail mower?
The verge flail mower covers long stretches of ditch quickly with a wide head; the hedge cutter arm reaches higher (3.70 m / 12 ft 2 in) and further, carries the finger bar and works on steep banks.

Does the tractor need a spool valve?
No: the arm has its own PTO-driven pump and its own valve block; a 540 rpm PTO and a three-point linkage are all it needs.

How is it controlled?
With a remote control that mounts beside the driver's seat: levers, connected by hydraulic hoses, or a joystick, depending on the model.

How high does it reach?
Up to 3.70 m (12 ft 2 in) in height and 3.20 m (10 ft 6 in) of side reach on the larger models; the more compact arms are sized for hedges and verges close to the tractor.

Does it cut branches?
The flail head from 1.5 to 3 cm (0.6 to 1.2 in) depending on the model; the finger bar up to 3 cm (1.2 in), the double-blade bar up to 2 cm (0.8 in). For branches up to 9 cm (3.5 in) there is the disc saw bar, in the hedge cutter bars category.

What is the minimum tractor weight?
From 800 to 1,500 kg (1,764 to 3,307 lb) depending on the arm: the minimum weight required is shown on each product page.

Which bars and heads can be fitted?
It depends on the arm: some take only the 130 to 180 cm (51 to 71 in) bars, others both head and bar. The possible combinations are listed on each product page.

Delivery and warranty?
2-year warranty and free delivery within the EU on a pallet, with a phone call before delivery.

What our customers say about us