Filter by sub-categories
Pruning shredder, stalk chopper or forestry mulcher
Vineyards and orchards need a shredding capacity of 5 to 8 cm (2 to 3.1 in) and a width that fits the row, from 150 to 220 cm (59 to 87 in). For stalks and stubble what counts is width, up to 260 cm (102 in), and forward speed, with hammers that break up maize stalks and spread them over the ground. The forestry mulcher for tractors has 1,600 g (56 oz) hammers and a reinforced rotor for suckers, scrub and branches up to 15 cm (6 in): clearing woodland edges, reclaiming rough ground, cutting firebreaks.
Heavy hammers, Y-blades and cutting diameter
The 1,100 g (39 oz) hammers shred branches of 4 to 6 cm (1.6 to 2.4 in); on the models built for thick prunings they go up to 8 cm (3.1 in). Where you mainly top grass and light residue over large areas, some models take Y-blades in place of hammers (54 to 66 blades instead of 18 to 22 hammers): a finer cut and lower power draw.
The right tractor
From 50 hp for the 150 to 160 cm (59 to 63 in) models to 130 hp for the 220 to 260 cm (87 to 102 in) ones; the weight, 480 to 900 kg (1,058 to 1,984 lb), calls for an adequate linkage and, on lighter tractors, front ballast. The PTO shaft supplied is sized for a 540 rpm PTO.
Frequently asked questions
Which flail mower for maize stalks?
A heavy-duty mower from 200 to 260 cm (79 to 102 in) with 1,100 g (39 oz) hammers: it chops and spreads the stalks in a single pass; it needs 60 to 130 hp depending on width.
Which flail mower for thick prunings?
The models with a 6 to 8 cm (2.4 to 3.1 in) shredding capacity, from 160 to 220 cm (63 to 87 in), for vineyards and orchards with heavy pruning.
What is a forestry mulcher for tractors?
A flail mower with a reinforced rotor and 1,600 g (56 oz) hammers that knocks down and shreds suckers, scrub and branches up to 15 cm (6 in); it needs a tractor of 80 hp or more.
How many horsepower does a 200 cm flail mower need?
From 60 to 120 hp depending on model and use; each product page gives the minimum and maximum tractor power.
Hammers or Y-blades?
Hammers for branches, stalks and mixed vegetation; Y-blades for grass and light residue over large areas, with lower power draw.
Do I need ballast?
With 500 to 900 kg (1,100 to 1,984 lb) hanging off the back, front ballast is advisable on lighter tractors; always check the linkage lift capacity.
What is the cutting height?
Adjustable from 10 to 75 mm (0.4 to 3 in) depending on model, to cut low on stubble and higher on stony ground.
Delivery and warranty?
2-year warranty and free delivery within the EU on a pallet, with a phone call before delivery.
Français
Deutsch
Română
Русский
Bokmål