Hedgecutter for tractor, multiple hedge and grass verge rear arm cutter - DELEKS® CONDOR-80-H, Casappa Made in Italy Hydraulic system - Pto shaft CE included.
CONDOR-80-H Hedge cutter has been engineered for clearing overgrowth from highway medians and for initial land clearing for housing, parks and recreational areas. The CONDOR-80-H is ideal for professional use, pruning roadside and traffic island hedges, however can also be used for parks, green spaces, gardens, ditches, dykes, and inclines in general. The hedge cutter itself is powered by a PTO shaft (supplied with the machine) and can be used with all 60-100HP (3 ton) tractors e.g Kubota, John Deere, Ford, Deutz-Fahr, Case, etc..
MEASURES (see pictures):
A: 3950 mm
B: 1650 mm
C: 3300 mm
D: 1250 mm
BENEFITS AND FEATURES
The cutting surface it’s able to move and advance on the driver’s side.
Casappa Hydraulic double pump and Hydraulic motor Made in Italy.
100% hydraulically operated arm to accommodate for any kind of gradient of terrain. If the tractor is on slope the arm will steady itself to reduce downtime.
108 liters oil tank (Shell Tellus S2 MX 46).
Adjustable roller unit.
Documentation supplied with this article:
Invoice or Receipt
|Characteristic||Units metric||Units US|
|Working width||800.0 mm||2.62 ft|
|Overall width||1900.0 mm (closed)||6.23 ft (closed)|
|Min / Max cutting height||10.0 - 50.0 mm||0.4 - 1.97 in|
|Weight||630.0 kg||1390.0 lb|
|Overall height||1940.0 mm||6.36 ft|
|Tractor Power Range||60-100 Hp||60-100 Hp|
|3 point linkage||Cat. 2 (ø 25.0-28.0 mm)||Cat. 2 (ø 25.0-28.0 mm)|
|Hood height||430.0 mm||16.90 in|
|Spacing between the 2 lower points||670.0 - 810.0 mm||26.38 - 31.90 in|
|Number of Hammers||16||16|
|Maximum cutting diameter||40.0 mm||1.57 in|
|Overall length||700.0 mm||2.30 ft|
|Distance between pto attachment and ground||500.0 mm||19.70 in|
|Transmission: Drive method||Hydraulic||Hydraulic|
|Transmission: PTO||540 r/min||540 r/min|
|Transmission: Rotation of gearbox||Right side||Right side|
|Transmission: Free wheel||√||√|
|Transmission: RPM Rotor speed||2200 r/min||2200 r/min|
|Transmission: Oil in the gearbox||Yes / SAE 120 - ISO 72925||Yes / SAE 120 - ISO 72925|
|Rotor: diameter||110.0 mm||4.33 in|
|Rotor: bearings type and size||6008||6008|
|Rotor: sheet thickness||8.0 mm||0.32 in|
|Hammer: base width||55.0 mm||2.17 in|
|Hammer: top width||40.0 mm||1.57 in|
|Rear roller: diameter||100.0 mm||4.00 in|
|Rear roller: sheet thickness||4.0 mm||0.16 in|
|Rear roller: bearings type and size||UC205||UC205|
|Hydraulic Hoses||WP 400 Bar||WP 400 Bar|
|Pto shaft||CE 6x800 mm||CE 6x800 mm|
|Hood length||700.0 mm||2.30 ft|
|Displacement||4400.0 mm||14.50 ft|
|Transmission: Oil in the tank||120.0 L||120.0 L|
|Packing sizes||1900*800*2100mm||6.23*2.62*6.90 ft|